1000 LB Standard Electric Winch-Hoist

Item # 100AB

FEATURES

  • 1,000-lb single-line or 2,000-lb double-line lift
  • Trifecta system 115 Volt brake motor with triple brake system for instant stopping
  • Worm gear reduction for positive load holding
  • Rugged construction
  • Low voltage 10′ pendant control
  • High-capacity cable drum
  • Friction-less bearings

APPLICATIONS

  • Pull rolling loads up to 25,000 lbs
  • Multiple-story construction site work
  • Long-lift applications
  • Tower erection and maintenance
  • Easily portable from job to job

Construction Features

  • Heavy-duty angle base drilled for six 1/2″ bolts (9/16″ mounting holes) with no welding required
  • Fully sealed aluminum housings, with precision-cut gears, run in an oil bath
  • Hardened steel worm and forged bronze worm gear holds load in position when stopped
  • Stress-proof drum shaft
  • Frictionless bearings
  • 286:1 total reduction

Power

  • Universal 18,500 RPM reversible 1.25 HP brake motor (no-load speed)
  • 15′ power cord plugs into any 115 Volt AC grounded outlet • 6 amp – No load
  • 14 amp – Full load

Lifting Capacity

  • 1,000 lbs – 1-2 layers of cable (39′ of 1/4″ cable)
  • 50 lbs – 3 layers of cable (65′ of 1/4″ cable)
  • 600 lbs – full drum of cable (250′ of 1/4″ cable)

Drum Storage

  • 1/8″ – 1,000′
  • 1/4″ – 250′
  • 3/16″ – 450′
  • 5/16″ – 150′

For best results, use the minimum amount of cable required for application. Maintain four wraps of cable on the drum at all times.

Pulling Capacity–Rolling Load

My-te winch-hoists are rated at the vertical lifting capacity. The chart below represents the weight of a rolling load that may be pulled up a given incline. This chart is for reference only. All capacities are reduced to allow for nominal friction factors.

InclineMax Load Weight
0% - (0°)25,000 lbs
10% - (6°)8,000 lbs
20% - (11°)4,000 lbs
40% - (22°)2,100 lbs
60% - (31°)1,500 lbs
80% - (39°)1,300 lbs
100% - (45°)1,100 lbs

Speeds

  • 59 RPM: No-load drum speed
  • 30 FPM: No-load drum speed
  • 25 FPM: 500 lbs – single-line lift
  • 20 FPM: 1,000 lbs – single-line lift
  • 10 FPM: 2,000 lbs – double-line lift

Note: All speeds are based on one layer of cable on drum.



Side View

Front View

Top View